Aquario Neo Co2 Diffuser Special

TheNeodiffuser fromAquariofeatures microscopically small holes resulting in very fine and thorough bubble diffusion.

The microbubbles produced allow for better Co2 dissolution in your water column, effectively allowing aquatic plants to absorb Co2 properly.

Sleek and sturdy, theNeoDiffuser is made from transparent acrylic and is not easily broken when performing aquarium maintenance.

Similar to other diffusers, users are able to place it in the corner of a planted aquarium securely with the provided suction cup.

Soak it in water for 30 minutes before use to produce smaller bubbles.

Product Features:

• Full improvement(angel, joint, length, diffusion area)
• Reduction of back-flow pressure
• Smaller bubble than existing products
• Hard-to-break, elastic PC (poly-carbonate) pipe

Available in 3 sizes
Small Up to 20 gallons
Medium 20-40 gallons
Large 40+ gallons

Larger diffusers can be usedin smaller tanks.

Meet the Aquario NeoNormal Co2 Diffuser Family.
Important Notes:

• The ideal working pressure is10-30 PSI(Higher pressure might damage the diffuser)
• Attach the diffuser to your regulator and slowly increase the pressure to your desired level to avoid damaging your diffuser.
• Soak it in slightly warm water(NOT BOILING)for 30 minutes before use to produce smaller bubbles.
• When bubbles begin getting larger, put it in a bleach solution (1 part bleach 10 part water) for 10 minutes and wash with water several times removing all the bleach inside before use.

  Your diffuser seal is broken? Leaking from sides?
  You can use a small amount of Thin Superglue (any thinCyanoacrylate glue) to fix the broken seal in seconds.

  DO NOTget the glue on the diffuser’s surface.
  Wear gloves and be extra cautious when using the glue, it will bound skin instantly!
  Made in Korea

Aquario Neo Co2 Diffuser Special

TheNeodiffuser fromAquariofeatures microscopically small holes resulting in very fine and thorough bubble diffusion.

The microbubbles produced allow for better Co2 dissolution in your water column, effectively allowing aquatic plants to absorb Co2 properly.

Sleek and sturdy, theNeoDiffuser is made from transparent acrylic and is not easily broken when performing aquarium maintenance.

Similar to other diffusers, users are able to place it in the corner of a planted aquarium securely with the provided suction cup.

Soak it in water for 30 minutes before use to produce smaller bubbles.

Product Features:

• Full improvement(angel, joint, length, diffusion area)
• Reduction of back-flow pressure
• Smaller bubble than existing products
• Hard-to-break, elastic PC (poly-carbonate) pipe

Available in 3 sizes
Small Up to 20 gallons
Medium 20-40 gallons
Large 40+ gallons

Larger diffusers can be usedin smaller tanks.

Meet the Aquario NeoNormal Co2 Diffuser Family.

Important Notes:

• The ideal working pressure is10-30 PSI(Higher pressure might damage the diffuser)
• Attach the diffuser to your regulator and slowly increase the pressure to your desired level to avoid damaging your diffuser.
• Soak it in slightly warm water(NOT BOILING)for 30 minutes before use to produce smaller bubbles.
• When bubbles begin getting larger, put it in a bleach solution (1 part bleach 10 part water) for 10 minutes and wash with water several times removing all the bleach inside before use.

  Your diffuser seal is broken? Leaking from sides?
  You can use a small amount of Thin Superglue (any thinCyanoacrylate glue) to fix the broken seal in seconds.

  DO NOTget the glue on the diffuser’s surface.
  Wear gloves and be extra cautious when using the glue, it will bound skin instantly!

  Made in Korea